浸胶机

浸胶机资料也可参见美国凯美特公司网页http://www.chemat.com/dipmaster.tpl?cart=11269223563287549

       DipMaster 200，￥46万

      DipMaster 201，￥29万

=====================================================

DIPMASTER

DIPMASTERä Series Dip Coating Systems The dip coating technique is widely used to make double-side uniform coatings or thin films on large substrates. In the dip coating process, the substrate is immersed into a liquid and then withdrawn with a well-defined withdrawal speed under controlled conditions. Chemat’s high Quality, precision DipMasterä dip coating systems are incorporated with atmosphere control, drying/curing, a programmable dip coating profile (withdraw speed, immersion time, etc.) and solution manageable tanks (temperature, filtration, etc.). Accurate speed control is obtained through the use of a proven precision, off-the-shelf motion system. Vibration control is enhanced by structural rigidity, isolation of the tank and motion drive, and spring mounting supports.
----------------------------------------------------

"High Quality, precision dip coating systems that are available in three basic models or in custom adaptations based on application requirements.

	Precursor Solution
	Dip
	Withdrawal
	Curing Firing

 

DipMaster^TM 200 :Accommodates substrates up to a size of 12" x 12", with a withdrawal speed range of 0.5" to 4.0"/per minute. It has a maximum thermal oven temperature of 450 degrees Centigrade with programmable temperature control.

DipMaster^TM 201: Accommodates substrates up to 12" x 12", with a withdrawal speed range of 0.5" to 4.0" per minute. It has a manual temperature control with a maximum infrared oven temperature of 80 degrees Centigrade. There is an adjustable withdrawal distance, in a Controlled Environment. Some of the options available are computer interfacing, and dip-tanks with controlled temperatures.

DipMasterTM 200	DipMasterTM 201

--------------------------------------------------------------------------------

Coating Tanks

			Dip Coating Tanks　 For　 DipMasterä　 Dip Coating System
Dip tanks are critical components in DipMasterTM Dip Coating System. The tank will affect evaporation of the coating or thin film, thus the quality of the coatings. Chemat Technology Inc. specially designs the proper dip tanks for our customers based on our rich experience in dip coating process. In addition, the solution tank is made with different materials: stainless steel, polycarbonate, plastics. Special coatings such as Teflon can be applied to the stainless steel tank to make easy tank cleaning. Please consult us for your application needs.
Stainless Dip Tank in DipMaster 200

-------------------------------------------------------------------------------

Sample Holders

			Sample Holders　 For　 DipMasterä　 Dip Coating System
Dip coating process is widely used to deposit coatings on different shapes of substrates: flat, round, tube, etc. All these substrates will be needed special holders to produce high quality of coatings or thin films. Chemat Technology Inc. has specially designed tens of different holders for our customers in the past. We will continue to work with our customers to the best sample holders for their applications.
Holder for flat glass substrate Holder for ophthalmic lenses Holder for tube substrate